10 Biggest Advantages of Plywood
As you know, plywood is a forest product obtained from different trees. Plywood is formed by bonding thin wood layers to each other using phenolic resin. At least 3 thin wood panels must be glued together to form plywood. As the number of layers increases, the area in which the plywood product is used changes. There are different plywood materials for each area. The advantages of using plywood are considerable.
It is important to note that when the layers are bonded together, the surface fibers must face in the same direction. The result of the bonding process is always a single layer. This layered structure formed by combining thin trees is called plywood.
There are many kinds of plywood. Marin Plywood, Birch Plywood mathoplywood.com/product/birch-plywood , Beech Plywood. These names come from the tree used. The plywood which tree type is used is called that. Marine plywood, for example, is one of the first wood products to be used especially in boat construction and humid areas. Because marine plywood is highly resistant to water and moisture. Does not mold and rot for many years. That is why beech marin plywood is used if it is necessary to use wood in boat construction or in bathrooms or damp areas.
When it is considered from an architectural point of view, plywood is known as the decorative product that architects prefer most. Because of its aesthetic structure and durability, it has been in the first place in decoration works for many years. Nowadays, no other synthetic product gives the naturalness of wood. Wood reflects both nature and peace. Therefore, the use of wood continued to spread over the years.
Plywood has come a long way since its introduction in the early 20th century. For decades, plywood was seen as a substitute for solid wood instead. Later, with the plywood durability discovered in the decoration industry, it impressed everyone.
Today, plywood has become a priority choice especially for the construction industry and for homeowners.
Today we will talk to you about the advantages and properties of plywood that great decoration product. Of course, we’ve already started to talk about it, but let’s examine it in a little bit. Here are the top 10 advantages & benefits of plywood water contrast, which we penned considering the state of the world today.
Benefits of Plywood
Here is the advantages of plywood..
- Plywood looks great
Let’s start with something that can be seen from the outside. A few people will argue against the fact that plywoods look really great. Plywood panel is usually covered with solid wood, plywood looks as big as real wood. If a quality coating is used, it will look even larger.
The most important reason to look great is that it is produced using natural wood material. In particular, architects and designers prefer wood. Because today’s people need a lot of naturalness. The people of the metropolitan area trapped between concrete buildings need especially the plywood naturalness. For this reason, plywood is the most widely used first wood product in home decoration. Because wood is far from artificial. It always gives you an image that is intertwined with nature. Today, no other material can give you the naturalness of wood.
- Plywood is strong
As the plywood layers increase, the durability and strength of the plywood increases. We can even say that when 5-7 layers overlap, we obtain a material that is more durable than iron. If you ask why plywood is so strong and durable, the answer is very simple. The adhesives used in the production of plywood ensure that the already durable material is as strong as iron. Furthermore, the plywood becomes more durable with the cross layer method used in plywood production. Therefore, no material can be compared with the durability of the plywood.
If you believe the massive tree is strong, you are absolutely right. Believe it or not, plywood is even stronger. When combined with the power of natural wood, plywood has solved all of the problems. Solid wood, with its intersecting nature of plywood structure, distributes well and evenly, while solid wood tends to only be stronger throughout history.
Plywood is further strengthened by the use of coatings as well as strong phenolic adhesives.
- Plywood is durable
Unlike solid wood, plywood has uniform strength when combined with the grains used in it. Together with the use of good veneers and adhesives, this creates a very good plywood structure against sharp impacts and all kinds of abuse. This makes the plywood a very durable product and wood engineering stands out here.
If we talk a little about the durability of plywood, the most important example is the historical ruins. Plywood in museums you can see in many countries of the world, many products have survived from ancient times. This product, which shows no signs of wear and tear, is the best decoration product for users.
- Plywood is Economical
Nobody wants his investment to go to waste. So plywood is not an empty investment. It is economically very convenient and offers the quality the customer wants. This means that it is the only product that should be preferred for decoration even if it is actually expensive.
- Plywood is lightweight.
Given all its strength, plywood is surprisingly much lighter than solid wood. This makes plywood even more perfect for furniture making. This advantage makes it easy for carpenters or furniture manufacturers to produce easily.
Meanwhile, solid wood, a heavier material, has a rather gloomy appearance when used for furniture crafting or when used in other commercial applications. This is another advantage of the plywood product. It always looks cooler.
- Plywood can be produced in large sizes.
One of the many benefits of plywood is that its size varies. Is it big enough to allow you to make one piece of solid wood furniture? Of course not. On the other hand, standard plywood sheets are produced in large lengths of at least 1800 mm long and generally 1200 mm wide. As you can see, plywood can be shaped in different sizes for you. You can certainly do a lot with processed wood products of this size. In addition, if you order the desired size of production can be made.
- It is a versatile product.
I’m going to talk about a game that I love playing here. One of the most common places where plywood is used is bowling alley. The plywood used here as surface material is very durable and robust. In this way, the weight of the ball does not collapse the floor and your game pleasure is not half. In addition, many different products can be produced with plywood. Rocking chairs, roof construction, and you will be very surprised that even piano made of plywood. These examples prove that the plywood product is versatile.
- Its efficiency is quite high.
The reason for its high efficiency is that it is durable for many years. No waste material is generated when plywood is obtained. So it is a very efficient product.
- Environmentally friendly recyclable product.
Plywood made of wood is absolutely no harm to the environment and is easy to recycle. In the world where global warming is dominant, the use of plywood needs to increase.
- Quickly absorbs moisture and dries very quickly.
This is one of the reasons why it is used so much for decoration. Plywood used in environments with plenty of water provides good results for the consumer.
As you can see, plywood is quite durable and sturdy. You can find information about plywood types, prices, dimensions and specifications on our website. Matho Plywood one of the best German plywood supplier company. Do not buy plywood without consulting us. mathoplywood.com/contact/ us for more information.
For more; mathoplywood.com/product/beech-plywood/